Previous     Contents Menu     Next

Running Micro-Scope for Optimization

Now, for optimization, we want to run the Micro-Scope benchmark tests. Run Micro-Scope again, as outlined in steps 1 through 4 above. Then, do the following.

1. Use the arrow keys to select UTILITIES on the Micro-Scope main menu. Press ENTER. Use the arrow keys to move the cursor to RUN BENCHMARKS and press ENTER. Select RUN ALL and press ENTER again.

• Micro-Scope will now perform its benchmark tests. The monitor screen will go black for a few seconds. Don’t touch anything. When the tests have been completed, the Benchmarks display will show the results.
  
  
• Now you can verify that the megahertz for CPU and NPU are within a few MHz (megahertz) of the expected speed. If they are not, you’ll need to perform the steps above to ensure that the BIOS setup is correct, then check that jumper settings on the motherboard are correct.
  
  
• If these settings are all correct, you can now proceed with the Micro-Scope Diagnostics by continuing with the following steps.

Previous     Contents Menu     Next