Sound Card Test – Selects the Sound Card tests
for SoundBlaster and Adlib compatible sounds cards as well
as AC’97 sound cards.
NIC Card Test – Selects the Network Interface
Cards tests for the supported NIC cards.
USB Controller Test – Selects the USB Controller
test.
Flash CMOS – Flashes the CMOS with the data contained
in the RTCDATA.TXT file.
Compare System – Compares the system components
with the components listed in the CTEST.BIN file.
APM Power Cycling... – Selects the Power Cycling
which can turn the system power off then back on in the intervals
listed below.
Test every XX Loops – Selects the number
of loop counts for the power cycling event.
Turn ON in XX Minutes – Set the amount of
time before the system turns itself back on.
