Read Test... – Selects the Fixed Disk Read Test
for all the installed fixed disks in the system.
Cylinders – Enter the number of cylinders
to test on the fixed disk drives. Enter a 0 (zero) to
select all.
Increment – Enter the cylinder increment
number. This number allows the selection of testing every
cylinder or every second cylinder, every third cylinder,
etc.
Seek Test... – Selects the Fixed Disk Seek Test
for all the installed fixed disks in the system. The Cylinder
and Increment values are entered for the test too, has described
in the Fixed Disk Read test above.
Write Test... – Selects the Fixed Disk Write
Test for all the installed fixed disks in the system. The
Cylinder and Increment values are entered for the test too,
has described in the Fixed Disk Read test above.
Safe Write... – Selects the Fixed Disk Safe Write
Test for all the installed fixed disks in the system. The
Cylinder and Increment values are entered for the test too,
has described in the Fixed Disk Read test above.
Format Test... – Selects the Fixed Disk Format
Test for all the installed fixed disks in the system. The
Cylinder and Increment values are entered for the test too,
has described in the Fixed Disk Read test above.
